Members Form

Discussion of Custom Rod Building and Rod Building Activities.

Moderator: Harold T Durham

Al Engling
Site Admin
Posts: 81
Joined: Sat Jan 19, 2013 11:55 am

Members Form

Postby Al Engling » Mon Jan 21, 2013 10:20 am

why is the Members form locked on my side, or is the section still under development :?:

Thanks, Al



User avatar
Forum_Admin
Site Admin
Posts: 54
Joined: Wed May 23, 2012 4:49 pm

Re: Members Form

Postby Forum_Admin » Mon Jan 21, 2013 12:15 pm

Yes, it is locked. I was wondering if the members really wanted to have a member board. Seems that some folks put rod building stuff in the members section. It was originally set up to chat about non building stuff. If you guys want a members section, give me some feed back

Also we are going to send out an email to members notifying everyone that the board address has moved and the new board is operational. Don't think that has been done yet.
Some of you can help pass the word. It can be found via the navigation bar on the right.
Click on "Rod Building Forum".

Bob Balcombe
Posts: 123
Joined: Sat Jan 19, 2013 12:11 pm
Location: Elma, Washington State
Contact:

Re: Members Form

Postby Bob Balcombe » Mon Jan 21, 2013 9:05 pm

I went to the members form. I found I could not make a post or edit any of my post. My user name is Bob Balcombe, my membership number is 303, My question is why was this change made. In ether form there is not a post on rod building or a real question asked, let alone a hint
given. Why not? Is there away to go to the old section?
Good Wraps Bob
Good Wraps Bob

User avatar
Forum_Admin
Site Admin
Posts: 54
Joined: Wed May 23, 2012 4:49 pm

Re: Members Form

Postby Forum_Admin » Tue Jan 22, 2013 6:34 am

If you read my post above you will see that I stated that it is locked, thus preventing posting for now. There was some discussion that we did not need the MOB. I have a poll that members can respond as to their wishes.

Al Engling
Site Admin
Posts: 81
Joined: Sat Jan 19, 2013 11:55 am

Re: Members Form

Postby Al Engling » Tue Jan 22, 2013 11:38 am

My vote is to keep it, I feel it allows us as members to talk to each other without the general public seeing..

Al

kerry hansen
Posts: 187
Joined: Tue Jan 22, 2013 3:18 pm

Re: Members Form

Postby kerry hansen » Tue Jan 22, 2013 10:01 pm

keep it.

Bob Balcombe
Posts: 123
Joined: Sat Jan 19, 2013 12:11 pm
Location: Elma, Washington State
Contact:

Re: Members Form

Postby Bob Balcombe » Wed Jan 23, 2013 6:03 am

Keep it!!!! Question before you changed the site did you take a pole on what should be added or deleted
Good Wraps Bob
Good Wraps Bob


Return to “Custom Rod Building Forum”

Who is online

Users browsing this forum: No registered users and 1 guest